Copper clad steel wire

Copper clad steel wire
ASTM B452-09

Wire diameter: 0,8 -0,05 mm; 1,0 -0,05 mm; 1,2 -0,05 mm; 1,4 -0,05 mm; 1,6 -0,08 mm; 2,0 -0,08 mm,
Out-of-roundness of the wire should not exceed a half of the diameter tolerances.
Steel grades: Ø 0,8-2,0 mm – Sv08GS, Sv08G2S; Ø 0,8-1,4 mm – Sv08, Sv08A, Sv08GA Chemical composition of the steel is according to GOST 2246-70
Copper coating thickness – not less than 0,15 mkm.

Mechanical characteristics of alloy wire

Wire diameter, mm	Tensile strength
	N/mm2	kgs/mm2
0,8 – 1,4	880 – 1250	90 – 125
1,6	880 – 1180	90 – 120
2,0	780 – 1080	80 – 110

The wire is supplied in bundles of rectangular cross-section of one cut of wire or on the customer’s reels,

Bundles dimensions and weight

Wire diameter, mm	Outer diameter, mm		Inner diameter, m,		Height, mm		Weight, kg not exceeding
	Nominal	Tolerances	Nominal	Tolerances	Nominal	Tolerances
0,8 – 1,0	175	+10 / -5	100	+6 / -2	50	+4	10
1,2 – 2,0	320	+25 / -5	220	+8 / -4	85	+4 / -6	25
1,6 – 2,0	600	+50 / -10	400	+20 / -15	90	+8 / -10	80