Rebar B 500C (weldable, cold rolled)
Rebar B 500C (weldable, cold rolled)
ASTM A615/A615-M2009; DIN 488; 10080
ASTM A615/A615-M2009; DIN 488; 10080
Application: ferroconcrete constructions reinforcing, along with and instead of the following wire and bar reinforcement: VR1, AIII (A400) and A500S. Main characteristics and dimensions:
Nominal diameter, dh, mm | Nominal cross-section area, Fh, mm2 | Nominal mass of a piece of 1 m length, kg | Weight of a piece of 1 m length tolerance, % |
4,0 | 12,60 | 0,099 | ±4,5 |
5,0 | 19,63 | 0,154 | |
6,0 | 28,27 | 0,222 | |
8,0 | 50,26 | 0,395 | |
10,0 | 78,54 | 0,617 |
Mechanical and technological properties
Conventional yield strength, σ0,2 N/mm2 | Tensile strength, σv N/mm2 | Ratio of tensile strength actual value to conventional yield strength, σv / σ0,2 | Unit elongation at max, load (Agt), % |
500 | 550 | 1,08 | 2,5 |
Number of bends on 1800:
for steel Ø 4,0 mm – 4;
for steel Ø 5,0 mm – 5.
The rods of nominal Ø 6,0-10,0 mm and welded X-shaped joints should stand bend test on 1600 and 900 correspondingly (on a rod of Ø 3dn). The wire rod is supplied in bundles of 300-1500 kg (up to 3000 kg on the customer’s request) or in cut-to-length bars, tied up in packages.